7000-14801-0000000

4-pol., 0,14 - 0,75mm², 4 - 8mm, shielded, CAT5

Side 1

• Family construction form: M12
• No. of poles: 4
• Coding: D
• Gender: male
• Mounting method: inserted, screwed
• Tightening torque: 0,4 Nm
• Cable outlet: straight
• Material contact: Bronze
• Degree of protection (EN IEC 60529): IP67, IP65

Side 2

• Family construction form: Push-Lock spring clamp connection
• Mounting method: Field-wireable

Electrical data | Supply

• Operating voltage AC: 48 V
• Operating voltage DC: 60 V
• Current operating per contact max.: 4 A
• Operating voltage DC (UL-listed): 60 V
• Current operating per contact (UL): 4 A

Industrial Communication

• Data transmission rate max.: 100 Mbit/s
• Transfer parameters: CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1)

Diagnostics

• Status indication LED: No

Installation

• Cross section connection with wire end ferrule min.: 0,14 mm²
• Cross section connection with wire end ferrule max.: 0,5 mm²
• Cross section connection with wire end ferrule AWG min.: 28 AWG
• Cross section connection with wire end ferrule AWG max.: 20 AWG
• Cross section connection without wire end ferrule min.: 0,14 mm²
• Cross section connection without wire end ferrule max.: 0,75 mm²
• Cross section connection without wire end ferrule AWG min.: 26 AWG
• Cross section connection without wire end ferrule AWG max.: 18 AWG

Installation | Connection

• Mating cycles min.: 100
• Connection information: Push-Lock spring clamp connection

Device protection

• Shielded: Yes

Device protection | Electrical

• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Overvoltage category (EN 60950-1): II

Mechanical data | Material data

• housing: Zinc die-casting
• Material contact carrier: PA66
• Material contact: Bronze
• Coating contact: gold plated
• Locking material: Zinc die-casting
• Coating locking: Nickeled
• Gasket: NBR
• Combustibility class (UL94): V-0

Mechanical data | Mounting data

• Mounting method: inserted, screwed, Shaking protection
• Clamping range min.: 4 mm
• Clamping range max.: 8 mm

Environmental characteristics | Climatic

• Operating temperature min.: -40 °C
• Operating temperature max.: 85 °C

Important installation notes

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

• Product standard: EN IEC 61076-2-101 (M12)