7000-12901-0000000

4-pol., max. 0,75mm² 4 - 6mm

Side 1

• Family construction form: M12
• No. of poles: 4
• Coding: A
• Gender: female
• Mounting method: Field-wireable
• Threaded hole: M12
• Tightening torque: 0,6 Nm
• Width across flats: SW18
• Cable outlet: straight
• Material: PA
• Material contact: Brass
• Degree of protection (EN IEC 60529): IP67

Side 2

• Mounting method: Field-wireable
• Cable outlet: straight

Electrical data | Supply

• Operating voltage AC max.: 250 V
• Operating voltage DC max.: 250 V
• Current operating per contact max.: 4 A

Installation

• Connection cross section max.: 0,75 mm²
• Cross section connection without wire end ferrule AWG max.: 18 AWG

Installation | Connection

• Tightening torque: 0,6 Nm

Device protection

• Shielded: No

Device protection | Electrical

• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Overvoltage category (EN 60664-1): II
• Rated surge voltage: 2,5 kV
• Insulation resistance min.: 100 mΩ
• Material group (IEC 60664-1): III

Mechanical data | Mounting data

• Height: 54 mm
• Width: 20 mm
• Depth: 20 mm
• Mounting method: inserted, screwed, Shaking protection
• Clamping range min.: 4 mm
• Clamping range max.: 6 mm

Environmental characteristics | Climatic

• Operating temperature min.: -40 °C
• Operating temperature max.: 85 °C

Important installation notes

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
• Note on mounting: The plug connectors must not be connected or disconnected under load. Non-compliance and improper use can result in personal injury., The user must take suitable safety precautions to ensure that the plug connector cannot be accidentally disconnected., To

Conformity

• Product standard: EN IEC 61076-2-101 (M12)