7000-12702-0000000

4-pol., max. 0,75mm², 4 - 6mm

Side 1

• Family construction form: M12
• No. of poles: 4
• Coding: A
• Gender: male
• Mounting method: inserted, screwed
• Threaded hole: M12 x 1
• Tightening torque: 0,6 Nm
• Width across flats: SW18
• Cable outlet: straight
• Material contact: Copper alloy
• Coating contact: gold plated
• Degree of protection (EN IEC 60529): IP67

Electrical data | Supply

• Operating voltage AC max.: 250 V
• Operating voltage DC max.: 250 V
• Current operating per contact max.: 4 A

Installation

• Connection cross section max.: 0,75 mm²

Installation | Connection

• Connection: Screw terminals SK
• Tightening torque: 0,6 Nm
• Width across flats: SW18

Device protection | Electrical

• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Overvoltage category (EN 60950-1): II
• Insulation resistance min.: 100 mΩ

Mechanical data | Material data

• housing: PBT
• Coating contact: gold plated
• Locking material: Copper alloy

Mechanical data | Mounting data

• Clamping range min.: 4 mm
• Clamping range max.: 6 mm

Environmental characteristics | Climatic

• Operating temperature min.: -40 °C
• Operating temperature max.: 85 °C

Important installation notes

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.