7000-12491-0000000

4-pol., 0,14 - 0,34mm², 2,9 - 5,1mm

Side 1

• Family construction form: M12
• No. of poles: 4
• Coding: A
• Gender: male
• Mounting method: inserted, screwed
• Threaded hole: M12 x 1
• Tightening torque: 0,6 Nm
• Cable outlet: straight
• Material contact: Brass
• Coating contact: gold plated
• Degree of protection (EN IEC 60529): IP67, IP65

Side 2

• Mounting method: Field-wireable

Electrical data

• Contact resistance max.: 10 mΩ

Electrical data | Supply

• Operating voltage AC max.: 32 V
• Operating voltage DC max.: 32 V
• Current operating per contact max.: 4 A

Installation

• Single wire diameter min.: 0,1 mm
• Connection cross section min.: 0,14 mm²
• Connection cross section max.: 0,34 mm²

Installation | Connection

• Connection: Cut clamps IDC
• Tightening torque: 0,6 Nm
• Mating cycles min.: 100
• Wire insulation diameter min.: 1 mm
• Wire insulation diameter max.: 1,6 mm

Device protection | Electrical

• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Rated surge voltage: 1,5 kV
• Material group (IEC 60664-1): I

Mechanical data | Material data

• housing: PA

Mechanical data | Mounting data

• Height: 43 mm
• Width: 15 mm
• Depth: 15 mm
• Mounting method: inserted, screwed
• Looking techniques: Screw locking
• Clamping range min.: 2,9 mm
• Clamping range max.: 5,1 mm

Environmental characteristics | Climatic

• Operating temperature min.: -40 °C
• Operating temperature max.: 85 °C

Important installation notes

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

• Product standard: EN IEC 61076-2-101 (M12), EN 45545-2, EN 50155
• Shock and vibration resistance: EN/IEC 61373
• Fire protection: EN 45545-2, HL1-HL3, requirement sets R22, R23, R24