7000-12411-6241000

PUR 4x0.34 bk UL/CSA 10m

Genel

• Cable length: 10 m

Side 1

• Tightening torque: 0,6 Nm
• Mounting method: inserted, screwed
• Coating contact: gold plated
• Family construction form: M12
• Thread: M12 x 1
• suitable for corrugated tube (internal Ø): 10 mm
• Cable outlet: angled
• Coding: A
• Material contact: Copper alloy
• Material: PUR
• No. of poles: 4
• Width across flats: SW13
• Degree of protection (EN IEC 60529): IP65, IP66K, IP67

Side 2

• Stripping length (jacket): 20 mm
• Family construction form: free cable end

Electrical data | Supply

• Operating voltage DC: 24 V
• Operating voltage DC min.: 18 V
• Operating voltage DC max.: 30 V
• Operating voltage DC max. (UL-listed): 30 V
• Current operating per contact max.: 4 A

Diagnostics

• Status indication LED: green, yellow

Installation | Connection

• Stripping length (jacket): 20 mm
• Mounting set: M12 x 1
• Gender: female

Device protection | Electrical

• Degree of protection (EN IEC 60529): IP65, IP67, IP66K
• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Rated surge voltage: 0,8 kV
• Material group (IEC 60664-1): I

Mechanical data | Material data

• Coating locking: Nickeled
• Coating of fitting: nickel plated
• Locking material: Zinc die-casting
• Material screw connection: Zinc die-casting

Mechanical data | Mounting data

• Mounting method: inserted, screwed, Shaking protection

Environmental characteristics | Climatic

• Operating temperature min.: -30 °C
• Operating temperature max.: 85 °C
• Additional condition temperature range: depending on cable quality

Important installation notes

• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.

Conformity

• Product standard: DIN EN 61076-2-101 (M12)