7000-08621-0000000

3-pol., 0,14 - 0.5mm², 2,5 - 5mm

Side 1

• Family construction form: M8
• No. of poles: 3
• Coding: A
• Gender: female
• Mounting method: inserted, screwed
• Tightening torque: 0,4 Nm
• Width across flats: SW13
• Cable outlet: straight
• Material contact: Brass
• Coating contact: gold plated
• Degree of protection (EN IEC 60529): IP67

Side 2

• Mounting method: Field-wireable

Electrical data | Supply

• Operating voltage AC max.: 50 V
• Operating voltage DC max.: 60 V
• Current operating per contact max.: 4 A

Installation

• Connection cross section min.: 0,14 mm²
• Connection cross section max.: 0,5 mm²

Installation | Connection

• Connection: Screw terminals SK

Installation | Pin assignment

• Coding: A

Device protection | Electrical

• Additional condition protection degree: inserted, screwed
• Pollution Degree: 3
• Overvoltage category (EN 60664-1): III
• Overvoltage category (EN 60950-1): II
• Insulation resistance min.: 100 mΩ

Mechanical data | Material data

• housing: PBT
• Material contact carrier: PA66

Mechanical data | Mounting data

• Height: 40 mm
• Width: 13,5 mm
• Depth: 13,5 mm
• Clamping range min.: 2,5 mm
• Clamping range max.: 5 mm

Environmental characteristics | Climatic

• Operating temperature min.: -40 °C
• Operating temperature max.: 85 °C

Important installation notes

• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.